Resolver Incremental

ELECTRICAL

INPUT POWER

• Voltage: 18-30 VDC
• Current: 250 mA @ 24 VDC exclusive of load
• High Voltage: Min. 2.4 VDC TTL Compatible
• Low Voltage: Max. 0.4 VDC TTL Compatible

PROTECTION

• Reverse Voltage Protected Inputs
• Short Circuit Protected Outputs

POWER-ON SETTLING TIME

• Upon power-up the outputs are tri-stated for up to 100mSec.

OUTPUT FORMAT

• Incremental Programmable up to 1024 Pulses Per Rev.

OUTPUT DRIVERS

• Line driver device: ET7272
• Voltage: 30V/V = 18-30VDC (Vin = Vout) | 30V/5= 5VDC
• Max Output Current: 40mA
• High Voltage: 30 VDC@ 20mA source current
• Low Voltage: 5 VDC @ 20mA sink current

Resolver Absolute

ELECTRICAL

INPUT POWER

• Voltage: 18-30 VDC
• Current: 250 mA @ 24 VDC exclusive of load High Voltage:
• Min. 2.4 VDC TTL Compatible Low Voltage: Max. 0.4 VDC
• TTL Compatible

OUTPUT DRIVERS

• Line driver device: ET7272
• Voltage: 30V/V = 18-30VDC (Vin = Vout) 30V/5= 5VDC
• Max Output Current: 40mA
• High Voltage: 30 VDC@ 20mA source current Low Voltage:
• 5 VDC @ 20mA sink current

OUTPUT FORMAT

• Gray Code/Gray Code Minus: Programmable up to 4096
• Binary/Binary Minus: Programmable up to 4096
• BCD: Programmable up to 1999

DATA SYNCHRONIZATION

• Data Transfer input:
  • HIGH: Position data continuously updated
  • LOW: Position data latched at High to low transition and remains unchanged until input goes High again

PROTECTION

• Reverse Voltage Protected Inputs Short Circuit
• Protected Outputs

POWER-ON SETTLING TIME

• Upon power-up the outputs are tri-stated for up to 100mSec.